Find your plan

How-to guide

4x8 Raised Garden Bed Material List: Cedar, Soil, Screws

4x8 material list: raised garden bed, cedar, screws, soil mix

A 4×8 raised garden bed material list for this 4′ 0″ x 8′ 0″ cedar bed comes to 11 cedar boards (9 of them 2×6), 32 screws of 3 in and 34 of 2 1/2 in, and 1.08 cu yd of soil mix. The bed is 11″ deep, 2 boards high, with a cap rail on top.

Every row below comes from the shopping list and cut list of the 3DSHEDPLANS 4×8 raised garden bed plan. The bed is built from standard US lumber sizes, so any home center or lumber yard has what you need.

What this 4×8 raised bed list assumes

  • Size: 4′ 0″ wide and 8′ 0″ long outside, 3′ 9″ x 7′ 9″ inside, about 29.1 sq ft of growing space.
  • Walls: 2 courses of cedar 2×6 on edge, 11″ deep, screwed into 4 cedar 4×4 corner posts 11″ long.
  • Stakes: 2 cedar 2×4 mid stakes, 1′ 11″ long, driven 1′ 0″ into the ground to stop the long sides bowing out under the soil.
  • Cap: a 2×6 cap rail with 45 degree miters at the corners, 1/2″ past the boards on the outside, so you can sit on the edge or rest a tray on it.
  • Weight: the empty box weighs about 72 lb, so two people can carry it into place before it is filled.

Lumber sizes are nominal. A 2×6 measures about 1 1/2 x 5 1/2 in and a 4×4 about 3 1/2 x 3 1/2 in, as the American Wood Council explains. That is why two courses of 2×6 give an 11″ deep bed, not 12 in.

The 4×8 raised garden bed material list

The For column names the parts each board or item becomes. Quantities are what you buy, with no spares added.

Item Qty For / unit
Cedar 2×4 x 8 ft 1 Mid stake
Cedar 2×6 x 8 ft 6 Long side board, End board
Cedar 2×6 x 10 ft 3 Cap, long side (45 deg miters, long point), Cap, end (45 deg miters, long point)
Cedar 4×4 x 8 ft 1 Corner post
Exterior screws 3 in, 304 stainless or coated for cedar (2 per board end into the posts) 32
Exterior screws 2 1/2 in, same kind (stakes: 2 per course; cap: 2 into the post and 1 across each miter, every 16 in between) 34
Garden soil mix (the box holds 24.2 cu ft; order 20% more for settling) 1.08 cu yd
Landscape fabric or plain cardboard for the bottom (optional, smothers grass) 40 sq ft
Hardware cloth 1/2 in (1/4 in for voles), 48 in wide, plus 1/2 in staples (optional, gophers, moles and voles; lines the bottom inside, 1 1/2 in up the boards) 8 ft

Cut list: every part

Each board is listed in the stock length that wastes the least for its parts. Cut the long boards first and keep the offcuts for the short parts.

Part Board Boards Pieces per board
Cap, long side (45 deg miters, long point) 2×6 x 10 ft 2 1 x 8′ 1″ cap, long side (45 deg miters, long point)
Long side board 2×6 x 8 ft 4 1 x 8′ 0″ long side board
Cap, end (45 deg miters, long point) 2×6 x 10 ft 1 2 x 4′ 1″ cap, end (45 deg miters, long point)
End board 2×6 x 8 ft 2 2 x 3′ 9″ end board
Corner post 4×4 x 8 ft 1 4 x 11″ corner post
Mid stake 2×4 x 8 ft 1 2 x 1′ 11″ mid stake

How much soil a 4×8 raised bed needs

The box holds 24.2 cu ft of soil at 11″ deep. Soil settles after the first watering, so the plan orders 20% more: 29.1 cu ft, which is 1.08 cu yd in bulk or 15 bags of 2 cu ft. The same bed built one or three courses high takes this much:

Courses Depth Holds (cu ft) Order (cu ft) Order (cu yd) 2 cu ft bags
1 5 1/2″ 10.9 13.1 0.48 7
2 11″ 24.2 29.1 1.08 15
3 1′ 4 1/2″ 37.5 45.0 1.67 23

Bulk soil is sold by the cubic yard. For more than about 1 cu yd, delivery from a landscape yard is usually less work than carrying bags. A mix of topsoil and compost suits most vegetables; ask the yard for a raised bed or garden mix.

Hardware, liner and screws

  • Exterior screws 3 in, 304 stainless or coated for cedar: 32 each.
  • Exterior screws 2 1/2 in, same kind: 34 each.
  • Garden soil mix: 1.08 cu yd.
  • Landscape fabric or plain cardboard for the bottom: 40 sq ft.
  • Hardware cloth 1/2 in: 8 ft.

Cedar is soft and its tannins stain plain steel. Use 304 stainless or coated exterior screws as the list says, and predrill near board ends so the cedar does not split. Galvanized hardware cloth on the bottom keeps gophers, moles and voles out; skip it where you have none.

Why cedar, and what to avoid

Cedar heartwood resists decay better than most softwoods, which is why the plan uses it for every board, as the USDA Wood Handbook explains for naturally durable woods. Pick boards with straight grain and few loose knots, and keep the darker heartwood side facing the soil where you can.

  • Mixed board widths. Some 2×6 boards run a little wider or narrower. Buy all the wall boards from one stack so the courses line up.
  • Skipping the mid stakes. Wet soil pushes hard on the long sides. The stakes hold the middle in line; without them a long side can bow out in the first season.
  • Filling before you level. Set the box level on the ground first. A box out of level loses soil and water at its low end.
  • Untested reclaimed wood. Old painted or treated boards may carry finishes you do not want next to food plants. New cedar avoids the question.

Tools and time

The plan’s build takes about 9 hours over these stages:

Stage Time
Site, level and smother the grass 2 h
Cut the parts 1 h
End panels, long sides, square 2 h
Set in place, stakes, cap 2 h
Fill with soil 2 h

You need a circular saw or miter saw for the cuts and the 45 degree cap miters, a drill driver with bits for predrilling, a tape measure, a speed square, a level and a sledge or mallet for the stakes. A miter saw makes the cap corners much easier to close tight.

Before you order

Most towns treat a raised bed as landscaping, but HOA rules can still limit where it goes. Check your local permit office or HOA if you are unsure, and call 811 before you drive stakes in a new spot.

To compare sizes, see the 4×4 raised bed plan, 4×12 raised bed plan, 4×10 raised bed plan, 3×8 raised bed plan, 2×4 raised bed plan. The raised garden bed plans page lists every bed with its size and depth.

Get the full plan

The 4×8 raised garden bed plan is a 3DSHEDPLANS PDF with this material list, the cut list and step-by-step 3D drawings from the first cut to the filled bed. Download the free 4×8 raised garden bed preview PDF to see the format first. Building something bigger? See all shop plans.

Frequently asked questions

How much lumber do I need for a 4×8 raised garden bed?

11 cedar boards: 1 2×4 x 8 ft, 6 2×6 x 8 ft, 3 2×6 x 10 ft, 1 4×4 x 8 ft. That builds 2 courses of 2×6 walls 11" deep, the corner posts, the mid stakes and the mitered cap rail.

How much soil does a 4×8 raised bed hold?

24.2 cu ft at 11" deep. Order 1.08 cu yd in bulk or 15 bags of 2 cu ft, which adds 20% for settling after the first watering.

How many screws for a 4×8 raised bed?

32 exterior screws of 3 in for the board ends into the corner posts and 34 of 2 1/2 in for the stakes and the cap. Use 304 stainless or coated screws made for cedar.

How deep is this 4×8 raised garden bed?

11", from 2 courses of 2×6 on edge. One course gives 5 1/2" and three courses give 1' 4 1/2"; the soil table on this page shows how much each depth takes.

Are free 4×8 raised garden bed plans with a material list available?

This page is a free material list for the bed. The free preview PDF shows the plan's drawings, and the paid plan PDF has the same list with the cut list and every step drawn.

Get 3 shed building tips by email

Short emails over 5 days: site prep, framing mistakes to avoid, and how the full plan saves lumber. Unsubscribe anytime.

Shed building guides

Plans for this guide

Step-by-step 3D plans with a complete materials list.

See all plans